Русский
Deutsch
Español
Français
Bandpass Filters are used in a variety of industries, including machine
vision,factory automation, security and surveillance, license plate
recognition, medical and life science, agricultural inspection, aerial
imaging, motion analysis, photography and cinematography.WISOPTIC's bandpass filters include mass collection of dielectric-coated
filters, colored glass filters, neutral density filters, spatial
filters, and tunable optical filter based on liquid crystal
technology. Specifically speaking, e.g.
Contact Now
Optical filters are used to selectively transmit or reject a wavelength or range of wavelengths. Their applications include fluorescence microscopy, spectroscopy, clinical chemistry, machine vision inspection, etc. Optical filters are widely used in light system of life science, imaging, industrial, or defense industries. For example, Bandpass interference filters are designed to transmit a portion of the spectrum, while rejecting all other wavelengths. Notch filters reject a portion of the spectrum, while transmitting all other wavelengths.
Contact Now
Optical filter is usually a component with a wavelength-dependent transmittance or reflectance. It's used to selectively transmit or reject a wavelength or range of wavelengths. Filters with particularly weak wavelength dependence of the transmittance are called neutral density filters. The general applications of optical filters include fluorescence microscopy, spectroscopy, clinical chemistry, machine vision inspection, etc. Bandpass interference filters are designed to transmit a portion of the spectrum, while rejecting all other wavelengths.
Contact Now
A Pockels cell driver is a high-voltage regulated power supply,
either pulse or continuous, allowing to control a birefringence of an
electro-optical crystal (KTP, KD*P, BBO, etc.) in order to drive the
polarization direction of the light propagating through the crystal.WISOPTIC has developed and produces a variety of Pockels cell drivers
for different applications: from very simple compact devices for
q-switching to precise and powerful fast models for pulse picking,
cavity damping, regenerative amplifier control, etc.
Contact Now
Thin film polarizers are based on interference within a dielectric optical thin-film
coating on a thin glass substrate. They are made from composed materials which include a polarizing film, an inner protective film, a pressure-sensitive adhesive layer, and an outer protective film. Thin film polarizers are used for polarization separation, that's to say
to change un-polarized beam into linear polarized beam.
Contact Now
KTP (KTiOPO4 ) is one of the most commonly used nonlinear optical materials which offers a range of unique features: high optical quality, broad transparency range, wide acceptance
angle, small walk-off angle, and type I and II non-critical
phase-matching (NCPM) in a wide wavelength range.
Contact Now
Wisoptic’s optical mirrors are available for use with light in the UV,
VIS, and IR spectral regions. Optical mirrors with a metallic coating
have high reflectivity over the widest spectral region, whereas mirrors
with a broadband dielectric coating have a narrower spectral range of
operation; the average reflectivity throughout the specified region is
greater than 99%.
Contact Now
WISOPTIC provides sorts of quadric Aspheric Lens and high order Aspheric Lens, as well as infrared Aspheric Lens (ZnS, ZnSe, Ge, etc. ).WISOPTIC Capabilities - Aspheric Lens Medium PrecisionHigh PrecisionAperture5~200 mm20~1000 mmSurface Quality [S/D]< 40/20 [S/D]< 40/20 [S/D]Surface IrregularityPV< 0.5~5 µm RMS< λ/50 @ 632.8 nmAspheric Surface Type Quadric, High order Quadric, High order Manufacture Capability300 pcs/month20 pcs/year
Contact Now
An aspherical lens features a non-spherical but rotationally symmetric
shape with a curvature radius that changes at various points between the
center and the edge. Although producing this type of lens is difficult,
when manufactured properly, it offers greater functionality than a
comparable spherical lens.Spherical Lenses vs. Aspherical LensesSpherical lenses have a spherical surface and the same radius of
curvature across the entire lens. In contrast, aspherical lenses have a
more complicated surface with a gradually changing curvature from center
to edge.
Contact Now
Polarization is an important characteristic of light. Polarizers are key optical elements for controlling your polarization,
transmitting a desired polarization state while reflecting, absorbing or
deviating the rest. There is a wide variety of polarizer designs, each
with its own advantages and disadvantages.
Contact Now
Polarizer is a kind of optical filter
where the light transmission depends strongly on the polarization
state.
Normally, light with linear polarization in a certain direction is
passed, and light polarized in an orthogonal direction is either
absorbed or propagated to a different direction.For other directions of linear polarization with an angle θ against the“passing”direction, the transmission exhibits a cos2 θ
dependence.
That can be understood by considering that linear polarization state as a
linear superposition of the "passing”and the“blocked”state.Most polarizers act
Contact Now
WISOPTIC offers both plate and cube PBS for a variety of wavelength ranges and power handling requirements.
Contact Now
Polarizing Beamsplitters (PBS) splits incident unpolarized light into two perpendicular linearly polarized light. Among them, p-polarized light passes through completely, while s-polarized light is reflected at 45 deg which makes the emitting direction of s-light vertical to p-light. Additionally, beamsplitters can be used in reverse to combine two
different beams into a single one. Beamsplitters are often classified
according to their construction:cube or plate.Cube PBS are fabricated using two typically right angle prisms.
Contact Now
When classified by coatings, Optical Mirrors consist of dielectric mirrors and metallic mirrors. Dielectric mirror is an optical mirror made of thin layers of dielectric coating layers deposited on an optical substrate (UVFS or BK7). WISOPTIC offer dielectric laser mirrors for laser lines, for narrowband or broadband wavelength ranges covering spectrum from UV to IR. Metallic mirrors are coated with protected gold, silver, or aluminum. Metallic mirrors are widely used due to a moderate level of reflection over a very broad spectral range.
Contact Now
Optical lenses can be made in many shapes and may be comprised of a
single element or form constituent parts of a multi-element compound
lens system. They are used to focus light and images, produce
magnification, correct optical aberrations and for projection, mainly
controlling the focus or divergence light used in instrumentation,
microscopy and laser applications.
Contact Now
Corner cube prisms are optics which act as corner reflectors.
The basic operation principle is that there are internal reflections on
three mutually orthogonal prism surfaces, producing a direction of a
reflected beam which is nominally parallel to the direction of the
incident beam – with the accuracy limited only by the accuracy of the
surface orientation of the prism.
Precision prisms can offer excellent parallelism of incoming and
reflecting beams.
It is usually specified as an angular deviation, e.g.
Contact Now
Polarization optics is important for both intra and extra cavity use. By using high contrast thin film polarizers in their design, laser engineers can save weight and volume within the laser system without influencing the output. Compared with polarizing prisms, polarizers have larger incident angle and can be made with larger apertures. Compared with polarizers made from birefringent crystals, the advantage of thin film polarizers made from UVFS or N-BK7 is that they can be fabricated in very large sizes, therefore are
particularly well suited for high laser powers and UV wavelengths.
Contact Now
Thin Film Polarizers are made from composed materials which include a polarizing film, an inner protective film, a pressure-sensitive adhesive layer, and an outer protective film. Polarizer is used to change un-polarized beam into linear polarized beam.
Contact Now
Thin Film Polarizers are made from composed materials which include a polarizing film, an inner protective film, a pressure-sensitive adhesive layer, and an outer protective film. Polarizer is used to change un-polarized beam into linear polarized beam.
Contact Now
Yb:YAG's advantage is a wide pump band and an excellent emission
cross section. It is ideal for diode pumping. The broad absorption band
enables Yb:YAG to maintain uninterrupted pump efficiency across the
typical thermal shift of diode output. High efficiency means a
relatively small dimension Yb:YAG laser crystal will produce high power
output. Based on the YAG host crystal, Yb:YAG can be quickly integrated
into the laser design process.
Contact Now
Polarizing Beamsplitters (PBS) are
designed to split light by polarization state rather than
by wavelength or intensity. PBS are often used in
semiconductor or photonics instrumentation to transmit p-polarized light
while reflecting s-polarized light. Optical isolators use PBS to eliminate feedback-induced damage. PBS are typically designed for 0° or 45° angle of incidence
with a 90° separation of the beams, depending on the configuration.WISOPTIC offers a wide variety of PBS in a
range of configurations including plate, cube, or lateral displacement.
Contact Now
Dye Laser Handpiece are devices that screw onto the end of the laser's arm and convert the energy that the laser produces into different, new wavelengths of light.The two most common dye handpiece wavelengths are 585 nm and 650 nm,
which attach to Q-switched Nd:YAG lasers. For these wavelengths to be
produced, the Nd:YAG's 1064 nm wavelength is frequency-doubled to
produce the 532 nm wavelength, which is then converted by the dye
handpieces to produce either 585 nm or 650 nm. WISOPTIC use in-house made dye laser cells to make dye laser handpieces.
Contact Now
Optical beamsplitters play a vital role in many laser-based
measurement and positioning systems. Although the operation of a typical
beamsplitter is conceptually simple, its performance characteristics
can dramatically affect the accuracy and repeatability of the overall
system. Consequently, understanding the variables that distinguish
beamsplitter performance is an important step in comparing and
specifying components.
Contact Now
Front surface mirrors are coated with aluminum or dielectrics for
maximum reflection. WISOPTIC provides both kinds of front surface
mirrors: metal coated mirror and dielectric coated mirror.Dielectric mirror is an optical mirror made of thin layers of dielectric coating layers deposited on an optical substrate (UVFS or BK7). Dielectric laser mirrors are used for laser lines, for narrowband or broadband wavelength ranges covering spectrum from UV to IR. Metallic
mirrors are coated with protected gold, silver, or aluminum.
Contact Now
