Русский
Deutsch
Español
Français
Characterized by the excelent UV transmission, high damage threshold,
and high birefringence, KDP (Potassium Dihydrogen Phosphate) and KD*P
(Potassium Dideuterium Phosphate) are useful commercial NLO materials
for doubling, tripling and quadrupling of Nd:YAG laser at room
temperature or an elevated temperature. They are also excellent
electro-optic (EO) crystals with high electro-optic coefficients, widely
used as electro-optical modulators and Pockels cells for Q-switched
lasers.
Contact Now
Potassium Dihydrogen Phosphate (KDP) and Potassium Dideuterium Phosphate (KD*P, DKDP) crystals are among the most widley used nonlinear crystals. Both of these crystals are routinely used for the doubling, triplingand quadrupling of Nd:YAG lasers at room temperatures.
Contact Now
E-O Q-switch based on DKDP (KD*P) crystals are one of the most popular Pockels cells in the market.Deuterated potassium dihydrogen phosphate has good transmission from
390 nm to 1400 nm (0.39 μm – 1.4 μm) and combined with high
electro-optical coefficients makes it suitable for Pockels cells.Highly deuterated DKDP
(D>99% – WISOPTIC) is necessary to reach effective electro-optical
response.
Contact Now
KDP (KH2PO4 ) and DKDP/KD*P (KD2PO4 ) are among the most widely-used commercial NLO materials. With good UV transmission, high damage threshold, and high birefringence, these material are usually used for doubling, tripling and quadrupling of Nd:YAG laser. With high E-O coefficient, KDP and DKDP crystals are also widely used to make Pockels cells for laser system, such as Nd:YAG, Nd:YLF, Ti-Sapphire, Alexandrite, etc.
Contact Now
The EO Q-switch (Pockels cell) is an electro-optic device in which the crystal
produces linear changes in the birefringence of the crystal (in contrast
to the Kerr Effect, which is quadratic with E).
Pockels cells are essential components in various optical devices such
as Q-switches for lasers, free space electro-optical modulators, free
space switches. WISOPTIC use highly deuterated DKDP (KD*P) crystal (D%>99%) to make high quality Q-switches with high laser induced damage threshold.
Contact Now
Potassium dideuterium phosphate DKDP (KD * P) crystal has low optical loss, high extinction ratio, and excellent electro-optical performance. DKDP Pockels cells are made by using the longitudinal effect of DKDP crystals. The modulation effect is stable and the pulse width is small.
Contact Now
Potassium
Dihydrogen Phosphate (KDP) and Potassium Dideuterium Phosphate (DKDP)
are among the most widely-used commercial NLO materials, characterized
by good UV transmission, high damage threshold, and high birefringence,
though their NLO coefficients are relatively low. They are usually used
for doubling, tripling or quadrupling of a Nd:YAG laser (at constant
temperature).
Contact Now
Potassium dihydrogen phosphate KH2PO4 (KDP) is a
transparent dielectric material best known for its nonlinear optical and
electro-optical properties. Because of its nonlinear
optical properties, it has been incorporated into various laser systems
for harmonic generation and optoelectrical switching.
Contact Now
Wisoptic’s optical mirrors are available for use with light in the UV,
VIS, and IR spectral regions. Optical mirrors with a metallic coating
have high reflectivity over the widest spectral region, whereas mirrors
with a broadband dielectric coating have a narrower spectral range of
operation; the average reflectivity throughout the specified region is
greater than 99%.
Contact Now
Right angle prisms
are generally used to bend image paths or redirect light at 90°. This
produces a left handed image and depending on the orientation of the
prism, the image may be inverted or reverted.
Contact Now
One of the most important drawbacks of popular LiNbO3 crystal is its
susceptibility to photorefractive damage (optically induced change of
refractive index, usually under exposure with blue or green CW light).
The usual way to eliminate this effect is to keep LN crystals at
elevated temperatures (400K or more). Another way to prevent
photorefractive damage is MgO-doping (usually at levels of around 5 mol%
for congruent LN).
Contact Now
A right angle prism is an optical prism designed to deviate light by 90° or 180°, depending on the orientation of the prism and the face through which light enters. The joining edges and faces are perpendicular to the base faces, and all joining faces are rectangular. They are often preferable to plane mirrors, because they are easier to mount and align.
Contact Now
Polarizing Beamsplitters (PBS) are
designed to split light by polarization state rather than
by wavelength or intensity. PBS are often used in
semiconductor or photonics instrumentation to transmit p-polarized light
while reflecting s-polarized light. Optical isolators use PBS to eliminate feedback-induced damage. PBS are typically designed for 0° or 45° angle of incidence
with a 90° separation of the beams, depending on the configuration.WISOPTIC offers a wide variety of PBS in a
range of configurations including plate, cube, or lateral displacement.
Contact Now
Compared to more commonly used KTP crystal, KTA
crystal has larger non-linear optical and electro-optical
coefficients. KTA has the added benefit of
significantly reduced absorption in the 2 to 5 μm region. It has found
more and more applications in second harmonic generation (SHG), sum and
difference frequency generation (SFG)/(DFG), optical parametric
oscillation/ amplification (OPO/OPA), and electro-optical Q-switching. WISOPTIC do in-house growing and processing KTA crystal with high optical quality and various options of dimensional and coating specifications.
Contact Now
Polarizing Beamsplitters (PBS) splits incident unpolarized light into two perpendicular linearly polarized light. Among them, p-polarized light passes through completely, while s-polarized light is reflected at 45 deg which makes the emitting direction of s-light vertical to p-light. Additionally, beamsplitters can be used in reverse to combine two
different beams into a single one. Beamsplitters are often classified
according to their construction:cube or plate.Cube PBS are fabricated using two typically right angle prisms.
Contact Now
Optical Prisms are widely used to redirect light at a designated angle. They are ideal for ray deviation, or for adjusting the orientation of an image. An optical prism’s design determines how light interacts with it. When light enters an optical prism, it either reflects off an individual surface or several surfaces before exiting, or is refracted as it travels through the substrate. WISOPTIC offers a wide range of optical prisms with various designs, substrates, or coatings.
Contact Now
Readily available stock of periodically poled LN (PPLN) crystals can be provided
on short lead time, with various specifications of sizes and periods.PPLN SHG crystals are available for pump
laser wavelengths 976-2100 nm, generating light 488-1050nm.PPLN OPO crsytals are available for pump sources 515-1064 nm, generating visible
and IR CW beams.PPLN DFG crystals are available for various combinations of pump sources, generating wavelengths 2-5.5 um.PPLN SFG crystals are available for various combinations of pump
sources, generating wavelengths 500-700 nm.
Contact Now
Basically all Pockels cell drivers are made based on
solid-state electronic technology, using high voltage transistors such
as MOSFETs.
Multiple high voltage transistors may have to be stacked, taking care to
achieve an even distribution of voltage across those.
Instead of using some heavily isolated floating gate drive circuitry for
the different transistors, one may use certain advanced ideas such as
implementing so-called avalanche switch stacks involving avalanche
diodes and/or avalanche bipolar transistors.Device lifetimes can be very long, provided that properly engineered
Contact Now
Highly doped (50%) Erbium YAG is a well-known laser source for producing 2940nm emission, commonly used in medical (e.g. cosmetic skin resurfacing), and dental (e.g. oral surgery) applications due to the strong water and hydroxapatite absorption at this wavelength.Low doped (< 1%) Erbium YAG hase been studied as an efficient means to generate high power and high energy 1.6 micron 'eye-safe' laser emission thru 2 level resonant pumping schemes.
Contact Now
A Pockels cell driver is a high-voltage regulated power supply,
either pulse or continuous, allowing to control a birefringence of an
electro-optical crystal (KTP, KD*P, BBO, etc.) in order to drive the
polarization direction of the light propagating through the crystal.WISOPTIC has developed and produces a variety of Pockels cell drivers
for different applications: from very simple compact devices for
q-switching to precise and powerful fast models for pulse picking,
cavity damping, regenerative amplifier control, etc.
Contact Now
An aspherical lens features a non-spherical but rotationally symmetric
shape with a curvature radius that changes at various points between the
center and the edge. Although producing this type of lens is difficult,
when manufactured properly, it offers greater functionality than a
comparable spherical lens.Spherical Lenses vs. Aspherical LensesSpherical lenses have a spherical surface and the same radius of
curvature across the entire lens. In contrast, aspherical lenses have a
more complicated surface with a gradually changing curvature from center
to edge.
Contact Now
Items Specifications Material CTH:YAG (Cr, Tm, Ho - doped YAG)Doping ExtentCr: 0.3~1.2 at%; Tm: 5~6 at%; Ho: 0.3~0.4 at% Crystalline Direction[111] (± 5°)DimensionsDia 3~6 (+0/-0.05) mm × 50~120 (±0.5) mm (customized)Extinction Ratio> 25 dBSingle Pass WFD < λ/8 @633 nm over central areaSurface Quality 10-5 [s-d] per MIL-O-13830BClear Aperture> 90% over central areaEnd-surface Parallelism< 20"Perpendicularity< 5'End-surface Flatness< λ/8 @633 nmChamfer0.2 ± 0.05 mm × 45°Laser CoatingAR/AR @ 209
Contact Now
Pure LiNbO3 (LN) is a good candidate for various optical devices, but
has a major disadvantage due to its low threshold optical damage. MgO:LN (congruent
compositions) is one of the possible solutions to deal with this
problem. MgO doping has played an important role in LN and shown an
increased threshold laser beam strength by 100 times. An interesting
point is that every physical property of MgO:LN (e.g.
Contact Now
Tm3+:YLF crystal has a high absorption peak around 792 nm which locates in the diode pumping range, and also has a cross-relaxation process that provides the possibility for each absorbed pump photon to produce to ions at higher laser energy level. Tm3+: YLF laser is very suitable as a pump source for Ho3+:YAG laser. This is due to the good overlap of the emission band of Tm3+:YLF and the absorption band of Ho3+:YAG, and the ability to produce a linearly polarized output.
Contact Now
